Diagnosis Procedure

1. Check system setting.

   Refer to "SYSTEM SETTING: SPECIAL REPAIR REQUIREMENT ".

2. Check the operation.

   Is the inspection result normal? 

   YES: Entry/Exit function is OK.

   NO: GO TO 2.

1. Perform system initialization.

   Refer to "SYSTEM INITIALIZATION: SPECIAL REPAIR REQUIREMENT ".

2. Check the operation.

   Is the inspection result normal? 

   YES: Entry/Exit function is OK.

   NO: GO TO 3.

Check front door switch (driver side).

Refer to "COMPONENT FUNCTION CHECK ".

Is the inspection result normal? 

YES: GO TO 4.

NO: Repair or replace the malfunction parts.

Confirm the operation again.

Is the result normal? 

YES: Check intermittent incident. Refer to "INTERMITTENT INCIDENT ".

NO: GO TO  1.