Work Environment For Disassembly Of Li-Ion Battery
WARNING: This page is about a different car, the 2011 Nissan Leaf. However, it is still accessible from the selected car via links, so may be relevant.
- Must be an indoor environment.
- The work environment must be able to be isolated from the outside by shutters or other means to prevent the intrusion of rain, snow, sand, and other substances.
- The environment must prevent the entry of sweat during work, and also prevent condensation from occurring as a result of high temperature and humidity.
- No entry of foreign materials.
- In addition to being indoors, the environment must not permit the entry during disassembly work of metal powders, oil, or foreign substances resulting from causes such as servicing of other vehicles.
- If there is any risk of the above, use a plastic curtain or other means to block off the work area, or take other necessary steps.
- The floor must be dry.
- The floor must not become wet as a result of causes such as vehicles entering when it is raining or snowing.
- Work space
- Space approximately the size of one vehicle must be secured as the disassembly space.
- A sign indicating that disassembly is in progress or other measures must be taken so that persons other than the workers do not enter the work space.