Equipotential Test

WARNING: This page is about a different car, the 2011 Nissan Leaf. However, it is still accessible from the selected car via links, so may be relevant.

After installing the Li-ion battery, measure the resistance between the body of the battery pack (A) and the vehicle body (B).

WARNING: To prevent shock hazards, be sure to wear protective gear.

Standard: 0.1 Ω or less

If the result deviates from the standard values, perform the below inspection and correct the abnormal location.

Connection conditions of bonding plates
Corrosion on bonding plate mounting surfaces
Paint, oil, dust, or other substance on bonding plate mounting surfaces