Component Function Check

◦ With CONSULT

1. Turn ignition switch ON.
2. Select "ASCD BRAKE SW" in "DATA MONITOR" mode of "EV/HEV" using CONSULT.
3. Check that monitor indication as per the following condition.

   Monitor item	Condition		Indication
   ASCD BRAKE SW	Brake pedal	Slightly depressed	OFF
   		Fully released	ON

ⓧ Without CONSULT

1. Turn ignition switch ON.
2. Check the voltage HPCM harness connector terminals as per the following condition.

   +		-	Condition		Voltage (Approx.)
   HPCM
   Connector	Terminal
   B159	59	Ground	Brake pedal	Slightly depressed	0 V
   				Fully released	Battery voltage

   Is the inspection result normal? 

   YES: INSPECTION END

   NO: Proceed to "DIAGNOSIS PROCEDURE ".