Component Function Check

◦ With CONSULT

1. Turn ignition switch ON.
2. Select "STOP LAMP SW" in "DATA MONITOR" mode of "EV/HEV" using CONSULT.
3. Check that monitor indication as per the following condition.

   Monitor item	Condition		Indication
   STOP LAMP SW	Brake pedal	Slightly depressed	ON
   		Fully released	OFF

ⓧ Without CONSULT

1. Turn ignition switch OFF.
2. Check for stop lamp illumination as per the following condition.

   Brake pedal	Stop lamp
   Slightly depressed	Illuminated
   Fully released	Not illuminated

   Is the inspection result normal? 

   YES: INSPECTION END

   NO: Proceed to "DIAGNOSIS PROCEDURE ".