LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2012 >> M37 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Brake Control System (With VDC)) >> System Description >> Diagnosis System [Abs Actuator And Electric Unit (Control Unit)] >> CONSULT Function >> Active Test >> Notes
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Active Test: Notes

WARNING: This page is about a different car, the 2013 Infiniti M56 and 2013 Infiniti M37. However, it is still accessible from the selected car via links, so may be relevant.

The active test is used to determine and identify details of a malfunction, based on self-diagnosis test results and data obtained in the DATA MONITOR. In response to instructions from CONSULT, instead of those from ABS actuator and electric unit (control unit) on the vehicle, a drive signal is sent to the actuator to check its operation.

CAUTION:
  • Never perform ACTIVE TEST while driving the vehicle.
  • Always bleed air from brake system before active test.
  • Never perform active test when system is malfunctioning.
NOTE:
  • When active test is performed while depressing the pedal, the pedal depressing stroke may change. This is not a malfunction.
  • "TEST IS STOPPED" is displayed approx. 10 seconds after operation start.
  • When performing active test again after "TEST IS STOPPED" is displayed, select "BACK".
  • ABS warning lamp, brake warning lamp and FDC warning lamp may turn ON during active test. This is not a malfunction.
scientia non olet · About LEMON Manuals