Component Function Check
WARNING: This page is about a different car, the 2013 Infiniti M56 and 2013 Infiniti M37. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK OPTICAL SENSOR SIGNAL BY CONSULT
CONSULT DATA MONITOR
- Turn ignition switch ON.
- Select "OPTISEN (DTCT)" of BCM (HEADLAMP) data monitor item.
- Turn lighting switch AUTO.
- With the optical sensor illuminating, check the monitor status.
Monitor item Condition Voltage (Approx.) OPTISEN (DTCT) Optical sensor When illuminating 3.1 V or more (1) When shutting off light 0.6 V or less (1) Illuminates the optical sensor. The value may be less than the standard value if brightness is weak. Is the inspection result normal?
YES: Optical sensor is normal.
NO: Refer to "DIAGNOSIS PROCEDURE ".