Work Procedure
WARNING: This page is about a different car, the 2013 Infiniti M56 and 2013 Infiniti M37. However, it is still accessible from the selected car via links, so may be relevant.
- SAVING VEHICLE SPECIFICATION
CONSULT Configuration
Perform "Before Replace ECU" of "Read/Write Configuration" to save or print current vehicle specification. Refer to "DESCRIPTION ".
NOTE: If "Before Replace ECU" of "Read/Write Configuration" can not be used, use the "Manual Configuration" after replacing CAN gateway.: GO TO 2.
- REPLACE CAN GATEWAY
Replace CAN gateway. Refer to "REMOVAL AND INSTALLATION ".
: GO TO 3.
- WRITING VEHICLE SPECIFICATION
CONSULT Configuration
Perform "After Replace ECU" of "Read/Write Configuration" or "Manual Configuration" to write vehicle specification. Refer to "WORK PROCEDURE ".
: WORK END