DTC Detection Logic
WARNING: This page is about a different car, the 2013 Infiniti FX50. However, it is still accessible from the selected car via links, so may be relevant.
| DTC No. |
Trouble diagnosis name |
DTC detecting condition |
Possible cause |
| P0335 |
Crankshaft position sensor circuit |
- The crankshaft position sensor signal is not detected by the ECM during the first few seconds of engine cranking.
- The proper pulse signal from the crankshaft position sensor is not sent to ECM while the engine is running.
- The crankshaft position sensor signal is not in the normal pattern during engine running.
|
- Harness or connectors (Crankshaft position sensor circuit is open or shorted.)
(Accelerator pedal position sensor 2 circuit is shorted.)
(Battery current sensor circuit is shorted.)
[Camshaft position sensor (bank 1) circuit is shorted.]
(EVAP control system pressure sensor circuit is shorted.)
[Exhaust valve timing control position sensor (bank 1) circuit is shorted.]
(Manifold absolute pressure sensor circuit is shorted.)
- Crankshaft position sensor
- Accelerator pedal position sensor
- Battery current sensor
- Camshaft position sensor (bank 1)
- EVAP control system pressure sensor
- Exhaust valve timing control position sensor (bank 1)
- Manifold absolute pressure sensor
- Signal plate
|