LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2014 >> Q60 Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 74 (Engine Control System - Component Testing (Convertible)) >> Fuel Pump >> Component Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Component Inspection

WARNING: This page is about a different variant/trim than selected.
  1. CHECK FUEL PUMP 
    1. Turn ignition switch OFF.
    2. Disconnect "fuel level sensor unit and fuel pump" harness connector.
    3. Check resistance between "fuel level sensor unit and fuel pump" terminals as follows.
      Terminals Resistance (Ω)
      1 and 3 0.2 - 5.0 [at 25°C (77°F)]

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace "fuel level sensor unit and fuel pump". Refer to "REMOVAL AND INSTALLATION ".

scientia non olet · About LEMON Manuals