System Control Condition Display
Quickly push (less than 1.5 seconds) and release the MAIN switch ON.
The MAIN switch indicator (cruise indicator), set distance indicator, own vehicle indicator, and set vehicle speed indicator come on and ICC system is set to a standby state.
| Condition | Display on ICC system display | ||
|---|---|---|---|
| Standby mode | |||
| Control mode | Without a vehicle ahead | Set vehicle distance (Long) | |
| Set vehicle distance (Middle) | |||
| Set vehicle distance (Short) | |||
| When the vehicle speed exceeds the set speed | |||
| With a vehicle ahead | Set vehicle distance (Long) | ||
| Set vehicle distance (Middle) | |||
| Set vehicle distance (Short) | |||
| When the vehicle speed exceeds the set speed | |||