Operation Condition
| Power supply position | Engine start/stop condition | Push-button ignition switch operation frequency | |
|---|---|---|---|
| Brake pedal | Selector lever position | ||
| LOCK → ACC | Not depressed | Any position | 1 |
| LOCK → ACC → ON | Not depressed | Any position | 2 |
| LOCK → ACC → ON → OFF | Not depressed | Any position | 3 |
| LOCK → START ACC → START ON → START (Engine start) |
Depressed | P or N position (*1) | 1 [If the switch is pressed once, the engine starts from any power supply position (LOCK, ACC, and ON)] |
| Engine is running → OFF (Engine stop) |
- | P position | 1 |
| Engine is running → ACC (Engine stop) |
- | Any position other than P (*2) | 1 |
| Engine stall return operation while driving | - | N position | 1 |
*1: When the selector lever position is in the N position, the engine start condition is different according to the vehicle speed.
- At a vehicle speed of less than 4 km/h (2.5 MPH), the engine can start only when the brake pedal is depressed.
- At a vehicle speed of 4 km/h (2.5 MPH) or more, the engine can start even if the brake pedal is not depressed. (It is the same as "Engine stall return operation while driving".)
*2: When the selector lever position is in any position other than the P position and when the vehicle speed is 5 km/h (3.1 MPH) or more, the engine stop condition is different.
- Press and hold the push-button ignition switch for 2 seconds or more. (When the push-button ignition switch is pressed for too short a time, the operation may be invalid, so properly press and hold to prevent an incorrect operation.)
- Press the push-button ignition switch 3 times or more within 1.5 seconds. (Emergency stop operation)