Combination Switch Reading Function - Operation Example

In the following operation example, the combination of the status signals of the Combination Switch is replaced as follows: INPUT 1 - 5 to "1 - 5" and OUTPUT 1 - 5 to "A - E".

Example 1: When a Switch (TURN RH Switch) is turned ON

• The circuit between OUTPUT 5 and INPUT 1 is formed when the TURN RH Switch is turned ON.

  Courtesy of NISSAN NORTH AMERICA, INC.

  NOTE:

  • * : If so equipped.
  • TAIL LAMP Switch links lighting Switch 1ST and 2ND positions.
• BCM detects the Combination Switch status signal "1E" when the signal of OUTPUT 5 is input to INPUT 1.
• BCM judges that the TURN RH Switch is ON when the signal "1E" is detected.

Example 2: When some Switches (TURN RH Switch, FR WIPER LOW Switch) are turned ON

• The circuits between OUTPUT 5 and INPUT 1 and between OUTPUT 3 and INPUT 1 are formed when the TURN RH Switch and FR WIPER LOW Switch are turned ON.

  Courtesy of NISSAN NORTH AMERICA, INC.

  NOTE:

  • * : If so equipped.
  • TAIL LAMP Switch links lighting Switch 1ST and 2ND positions.
• BCM detects the Combination Switch status signal "1CE" when the signals of OUTPUT 3 and OUTPUT 5 are input to INPUT 1.
• BCM judges that the TURN RH Switch and FR WIPER LOW Switch are ON when the signal "1CE" is detected.