Work Support
WARNING: This page is about a different variant/trim than selected.
| Function | Description |
|---|---|
| UNIT CHARACTERISTIC WRITE | Writes the unit parameter of transfer to transfer control unit. |
| START CALIBRATION | Perform initial calibration of transfer control unit. |
| LOCK SLEEVE SENSOR* INITIALIZE | Format learning the transfer lock position sensor written to transfer control unit. |
| LOCK SLEEVE SENSOR* LEARNING | Perform learning the transfer lock position sensor. |
| OIL DETERIORATION INFO RESET | Format the transfer fluid viscosity written to transfer control unit. |
* : "LOCK SLEEVE SENSOR" means transfer lock position sensor.