Chassis Dynamometer Mode: Description

WARNING: This page is about a different car, the 2018 Infiniti Q60. However, it is still accessible from the selected car via links, so may be relevant.

This function must be used when performing the 2-wheel drive test (e.g. with 2-wheel chassis dynamometer, speedometer tester). (For details, refer to Work Procedure .)

The use of this mode is essential to avoid torque control and to perform a proper test with the 2-wheel chassis dynamometer. Charge warning lamp indicates this mode is set by blinking.

CAUTION:

Chassis Dynamometer Mode must be set when performing test with 2-wheel chassis dynamometer.
At the end of test, always cancel Chassis Dynamometer Mode and check that the charge warning lamp turns OFF.