Calibration Of DECEL G Sensor: Description
WARNING: This page is about a different car, the 2019 Nissan Armada and 2018 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Always perform the decel G sensor calibration before driving when the following operation is performed. Refer to Work Procedure .
NOTE:
Yaw rate/side/decel G sensor calibration is performed when performing the decel G sensor calibration.
X: Required -: Not required
|
Procedure |
Decel G sensor calibration |
|
Removing/ installing ABS actuator and electric unit (control unit) |
- |
|
Replacing ABS actuator and electric unit (control unit) |
X |
|
Removing/installing steering components |
- |
|
Replacing steering components |
- |
|
Removing/installing front suspension components |
- |
|
Replacing front suspension components |
- |
|
Removing/installing tire |
- |
|
Replacing tire |
- |
|
Tire rotation |
- |
|
Adjusting front wheel alignment. |
- |
|
Removing/installing yaw rate/side/decel G sensor |
X |
|
Replacing yaw rate/side/decel G sensor |
X |