July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal and Installation: Installation

CAUTION: Be sure to perform "Read/Write Configuration" when replacing ADAS control unit (With FEB models). For details, refer to Work Procedure .

Note the following, and install in the reverse order of removal.

Tighten the rear floor gusset

LH bolts to the specified torque.

Courtesy of NISSAN NORTH AMERICA, INC.

Bolt	: 35 N.m (3.6 kg-m, 26 ft-lb)
Bolt	: 80 N.m (8.2 kg-m, 59 ft-lb)