Removal and Installation: Installation

CAUTION:

Perform additional service when replacing control module. Refer to Description .
When off-center is bigger than 120 deg., refer to Diagnosis Procedure to correct off-center before performing the work.

Note the following, and install in the reverse order of removal.

Temporarily tighten bolts in sequence shown.
Torque to specification in reverse order.

Fig 1: Steering Angle Main Control Module Tightening Sequence
Courtesy of NISSAN NORTH AMERICA, INC.

(Bolts)

: 6.4 N.m (0.65 kg-m, 57 in-Ib)