DTC Diagnosis Procedure

With CONSULT

1. Turn the ignition switch ON.
2. Erase self-diagnosis for "DAST 1".
3. Turn the ignition switch OFF and wait for at least 10 seconds.
4. Start the engine.
   CAUTION:

   Never drive the vehicle.

5. Perform self-diagnosis for "DAST 1".

Is DTC "C13AF-00" detected?

YES>>

Replace steering angle main control module. Refer to STEERING ANGLE MAIN CONTROL MODULE : Removal and Installation .

NO>>

• Check enlarged contact spring of terminal. Refer to Inspection .
• Perform intermittent incident while turning steering wheel. Refer to Inspection .