DTC Diagnosis Procedure

With CONSULT

1. Turn the ignition switch OFF to ON.
2. Erase self-diagnostic results for "EPS/DAST 3".
3. Turn the ignition switch OFF and wait for at least 10 seconds.
4. Start the engine.
   CAUTION:

   Never drive the vehicle.

5. Perform self-diagnosis for "EPS/DAST 3".

Is DTC "C1607" detected?

YES>>

Power steering control module is malfunctioning. Replace steering gear assembly. Refer to STEERING GEAR AND LINKAGE : Removal and Installation .

NO>>

Check pin terminal and connection of each harness connector for malfunctioning conditions.