Additional Service When Replacing Control Unit: BCM: Description

BEFORE REPLACEMENT

CONSULT When replacing BCM, save or print current vehicle specification configuration before replacement.

NOTE:

If "Before Replace ECU" cannot be used, use the "After Replace ECU" or "Manual Configuration" after replacing BCM.

AFTER REPLACEMENT

CAUTION:

CONSULT

When replacing BCM, you must perform "After Replace ECU".
- Complete the procedure of "After Replace ECU" in order.
- If you set incorrect "After Replace ECU", incidents might occur.
- Configuration is different for each vehicle model. Confirm configuration of each vehicle model.
When replacing BCM, perform the system initialization (NATS).