Work Procedure

1. CONSULT Perform "Before Replace ECU" of "Read / Write Configuration" to save or print current vehicle specification. Refer to Work Procedure .
   NOTE: If "Before Replace ECU" of "Read / Write Configuration" cannot be used, use the "Manual Configuration" after replacing BCM.

>>

GO TO 2.

1. CONSULT Perform "Before Replace ECU" of "Read / Write Configuration" to save or print current vehicle specification. Refer to Work Procedure .
   NOTE: If "Before Replace ECU" of "Read / Write Configuration" cannot be used, use the "Manual Configuration" after replacing BCM.

>>

GO TO 3.

1. CONSULT Perform "Before Replace ECU" of "Read / Write Configuration" to save or print current vehicle specification. Refer to Work Procedure (Before Replacement) 3CH CAN GATEWAY or Work Procedure (Before Replacement) 6CH CAN GATEWAY.
   NOTE: If "Before Replace ECU" of "Read / Write Configuration" cannot be used, use the "Manual Configuration" after replacing BCM.

>>

GO TO 4.

1. Replace BCM. Refer to Removal and Installation .

>>

GO TO 5.

1. CONSULT Perform "After Replace ECU" of "Read / Write Configuration" or "Manual Configuration" to write vehicle specification. Refer to Work Procedure .

>>

GO TO 6.

1. For initialization and registration of Intelligent Keys, refer to CONSULT Immobilizer mode and follow the on-screen instructions.

>>

GO TO 7.

1. CONSULT Perform "After Replace ECU" of "Read / Write Configuration" or "Manual Configuration" to write vehicle specification. Refer to Work Procedure (After Replacement) .

>>

GO TO 8.

1. CONSULT Perform "After Replace ECU" of "Read / Write Configuration" or "Manual Configuration" to write vehicle specification. Refer to Work Procedure .

>>

GO TO 9.

1. Perform TPMS initialization. Refer to Work Procedure .

>>

Work End.