LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 1983 >> Pickup Base, 1.9 A, 4WD >> Repair and Diagnosis >> Engine Performance >> System >> Deceleration Control System >> Component Testing >> Speed Sensor
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Speed Sensor

  1. Connect a jumper wire between terminals "BY" and "LgW" at speed sensor wiring connector. Start engine and check for voltage between "Lg" and "BY" terminals.
  2. The speed sensor is normal if the voltage is zero when the engine runs at 2100-2300 RPM.
scientia non olet · About LEMON Manuals