LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 1986 >> I-Mark Base, 2D Hatchback, Automatic >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Procedures >> Alignment Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Alignment Specifications

WHEEL ALIGNMENT SPECIFICATIONS (I-MARK)

Application Specification
Front
Camber in Degrees
Fraction 5/16 +/- 1
Decimal .313 +/- 1.0
Caster in Degrees
Fraction 2 1/4 +/- 1/2
Decimal 2.25 +/- .5
Toe-In in Inches
Fraction 0 +/- 1/16
Decimal 0 +/- .06
Toe-In in Degrees
Fraction 0 +/- 1/8
Decimal 0 +/- .13
Toe-Out in Turns
Inner (1)
Outer (1)
Steering Axis Inclination (SAI) 12 1/8°
Rear
Camber in Degrees
Fraction 0
Decimal 0
Caster in Degrees
Fraction N/A
Decimal N/A
Toe-In in Inches
Fraction 1/16
Decimal .06
Toe-In in Degrees
Fraction 1/8
Decimal .13
Toe-Out in Turns
Inner N/A
Outer N/A
Steering Axis Inclination (SAI) N/A
(1) Information not available.
WHEEL ALIGNMENT SPECIFICATIONS (IMPULSE)

Application Specification
Front
Camber in Degrees
Fraction -1/4 +/- 3/4
Decimal -.25 +/- .75
Caster in Degrees
Fraction 2 1/2 +/- 1 1/2
Decimal 2.5 +/- 1.5
Toe-In in Inches
Fraction 0 +/- 1/13
Decimal 0 +/- .06
Toe-In in Degrees
Fraction 0 +/- 1/8
Decimal 0 +/- .13
Toe-Out in Turns
Inner (1)
Outer (1)
Steering Axis Inclination (SAI) (1)
Rear
Camber in Degrees
Fraction 0
Decimal 0
Caster in Degrees
Fraction N/A
Decimal N/A
Toe-In in Inches
Fraction 1/16
Decimal .06
Toe-In in Degrees
Fraction 1/8
Decimal .13
Toe-Out in Turns
Inner N/A
Outer N/A
Steering Axis Inclination (SAI) N/A
(1) Information not available.
WHEEL ALIGNMENT SPECIFICATIONS (P'UP - 2WD)

Application Specification
Front (See Figure & Figure )
Camber in Degrees
Fraction 1/2 +/- 1/2
Decimal .5 +/- .5
Caster in Degrees
Fraction 1/2 +/- 1/2
Decimal .5 +/- .5
Toe-In in Inches
Fraction 3/32 +/- 3/32
Decimal .09 +/- .09
Toe-In in Degrees
Fraction 3/16 +/- 3/16
Decimal .19 +/- .19
Toe-Out in Turns
Inner (1)
Outer (1)
Steering Axis Inclination (SAI) 7 1/2°
(1) Information not available.
WHEEL ALIGNMENT SPECIFICATIONS (PU'P - 4WD)

Application Specification
Front (See Figure )
Camber in Degrees
Fraction 9/16 +/- 1/2
Decimal .563 +/- .5
Caster in Degrees
Fraction 5/16 +/- 1/2
Decimal .313 +/- .5
Toe-In in Inches
Fraction 0 +/- 3/32
Decimal 0 +/- .09
Toe-In in Degrees
Fraction 0 +/- 3/16
Decimal 0 +/- .19
Toe-Out in Turns
Inner (1)
Outer (1)
Steering Axis Inclination (SAI) 7 1/16°
(1) Information not available.
WHEEL ALIGNMENT SPECIFICATIONS (TROOPER II)

Application Specification
Front (See Figure )
Camber in Degrees
Fraction 9/16 +/- 1/2
Decimal .563 +/- .5
Caster in Degrees
Fraction 1/2 +/- 1/2
Decimal .5 +/- .5
Toe-In in Inches
Fraction 0 +/- 3/32
Decimal 0 +/- .09
Toe-In in Degrees
Fraction 0 +/- 3/16
Decimal 0 +/- .19
Toe-Out in Turns
Inner (1)
Outer (1)
Steering Axis Inclination (SAI) 7 3/8°
(1) Information not available.
scientia non olet · About LEMON Manuals