Pattern Selection Switch

Disconnect pattern selection switch. Note terminal identification. See Fig 2 : Using an ohmmeter, check continuity between terminal No. 5 and other terminals in specified switch position. See PATTERN SELECT SWITCH TESTING .

PATTERN SELECT SWITCH TESTING

Switch Position	Test Terminals
PWR	1 & 2
PWR	4 & 5
NORM	1 & 3
NORM	5 & 6

Fig 1: Checking No. 1 Speed Sensor Continuity

Courtesy of ISUZU MOTOR CO.

Fig 2: Identifying Pattern Selection Switch Terminals

Courtesy of ISUZU MOTOR CO.