Main Switch
- Turn ignition off. Remove main switch. Unplug main switch 6-pin connector. Ensure main switch is off. Using a DVOM, check for continuity between main switch terminals No. 2 and 3 and terminals No. 5 and 6. SeeFig 1
. If continuity exists, go to next step. If continuity does not exist, replace main switch.
- Turn main switch on. Using a DVOM, check for continuity between main switch terminals No. 2 and 3, terminals No. 2 and 4, and terminals No. 5 and 6. SeeFig 1
. If continuity exists, main switch is okay. If continuity does not exist, replace main switch.
Courtesy of AMERICAN HONDA MOTOR CO., INC.