Set/Resume Switch
- Disable air bag system. See AIR BAG RESTRAINT SYSTEM article. Connect SRS Test Harness "C" (07LAZ-SL40300) to cable reel 8-pin connector. Using a DVOM, check for continuity between SRS Test Harness "C" connector terminals No. 2 and No. 3 with SET pressed. SeeFig 1
. If continuity exists, go to next step. If continuity does not exist, go to step 3).
- Using a DVOM, check for continuity between SRS Test Harness "C" connector terminals No. 1 and No. 3 with RESUME pressed. SeeFig 1
. If continuity exists, SET/RESUME switch and cable reel are okay. If continuity does not exist, go to next step.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Remove SET/RESUME switch. See SET/RESUME SWITCH R & I
under REMOVAL & INSTALLATION. Using a DVOM, check for continuity between SET/RESUME switch terminals No. 1, 2 and 4 with SET pressed. SeeFig 2
. If continuity exists, go to next step. If continuity does not exist, replace SET/RESUME switch.
- Using a DVOM, check for continuity between SET/RESUME switch terminals No. 1, 2 and 3 with RESUME pressed. SeeFig 2
. If continuity exists, replace cable reel. See CABLE REEL R & I
under REMOVAL & INSTALLATION. If continuity does not exist, replace SET/RESUME switch.
Courtesy of AMERICAN HONDA MOTOR CO., INC.