Section 17 (Engine Controls - System/Component Tests): Introduction

WARNING: This page is about a different car, the 1996 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For testing and diagnosis of Variable Valve Timing (VTEC) system, see DTC P1253 or DTC P1259 in TESTS W/CODES article.

Before testing separate components or systems, perform procedures in BASIC TESTING article. Since many computer-controlled and monitored components set trouble codes if they malfunction, also perform procedures in TESTS W/CODES article.

NOTE: Perform all voltage tests using a Digital Volt-Ohmmeter (DVOM) with a minimum 10-megohm input impedance, unless stated otherwise in test procedure. Testing individual components does not isolate shorts or opens. Use ohmmeter to isolate wiring harness shorts or opens.