LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 1996 >> Rodeo LS, 2.6 E >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Circuit Testing >> Power Window Circuit >> Right Front
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Right Front

  1. Turn ignition off. Remove right front power window switch from door trim panel. Disconnect power window switch harness connector "A". Turn ignition on. Using a voltmeter, check voltage between terminal No. 9 (Green/Red wire) of harness connector "A" and ground. SeeFig 1 . Battery voltage should be present.
  2. Turn ignition off. Using an ohmmeter, check for continuity between terminals No. 6 (Blue/Red wire) and No. 10 (Brown/White wire) at harness connector "A". Continuity should be present. Check for continuity between ground and terminal No. 5 (Black wire) at harness connector "A". Continuity should be present.
Fig 1: Front Power Window Switch Harness Connector Terminals (Connector "A")
G96E07616Courtesy of ISUZU MOTOR CO.
scientia non olet · About LEMON Manuals