LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 1996 >> Rodeo LS, 2.6 E >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Circuit Testing >> Power Window Circuit >> Right Rear
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Right Rear

  1. Turn ignition off. Remove right rear power window switch from door trim panel. Disconnect power window switch harness connector. Turn ignition on. Using a voltmeter, check voltage between terminal No. 4 (Green/Red wire) of harness connector and ground. SeeFig 1 . Battery voltage should be present.
  2. Turn ignition off. Using an ohmmeter, check for continuity between terminals No. 5 (Blue/Red wire) and No. 6 (Brown/White wire) at harness connector. Continuity should be present. Check for continuity between terminals No. 1 (Black wire) and No. 3 (Black wire) at harness connector. Continuity should be present.
Fig 1: Right/Left Rear Power Window Switch Harness Connector Terminals
G96J07614Courtesy of ISUZU MOTOR CO.
scientia non olet · About LEMON Manuals