Camshaft Position Sensor: Service and Repair

Removal Procedure

CAUTION: Refer to Vehicle Lifting Caution in Service Precautions.

1. Raise the vehicle.




2. Remove the RH tire assembly.




3. Remove the Camshaft Position (CMP) sensor electrical connector.
4. Remove the CMP sensor.




Installation Procedure

NOTE: Refer to Fastener Note in Service Precautions.




1. Install the Camshaft Position (CMP) sensor.

Tighten
Tighten the CMP Sensor bolt to 10 N.m (7.5 lb in).

2. Install the CMP sensor electrical connector.
3. Install the R.H. tire assembly.
4. Lower the vehicle.