LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 2002 >> Rodeo LS, 2.2 D >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Anti-Theft, Power Door Lock & Keyless Entry Systems >> Programming >> Programming Additional Id Codes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Programming Additional Id Codes

NOTE: This procedure registers additional ID codes while retaining current ID code. When additional ID codes registered exceeds 4, the oldest ID code will be dropped off.
  1. Ensure all doors are closed and unlocked. Open driver's door. Insert key into ignition. Go to next step.
  2. Turn ignition switch to ACC position, then to OFF position 3 times within 5 seconds after completing step  1 . Go to next step.
  3. Close driver's door and open it 2 times within 10 seconds after completing step  2 . Go to next step.
  4. Turn ignition switch to ACC position, then to OFF position 3 times. Close driver's door and open it. This step must be completed within 10 seconds after step  3 . Control unit should lock and unlock doors one time. If doors lock and unlock one time, go to next step. If doors do not lock and unlock one time, return to step  1 .
  5. Depress LOCK or UNLOCK button of transmitter within 20 seconds after step  4 . Control unit should lock and unlock doors one time. If doors lock and unlock one time, go to next step. If doors do not lock and unlock one time, return to step  1 .
  6. Depress LOCK or UNLOCK button of transmitter within 20 seconds after step  5 . Control unit will compare temporary ID code with receiving ID code. If codes are the same, control unit will lock and unlock doors one time. If doors lock and unlock one time, programming is complete. If codes are not the same, control unit will lock and unlock doors 3 times. Return to step  1 .
scientia non olet · About LEMON Manuals