LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 2002 >> Rodeo LS, 2.2 D >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Power-Assisted Steering System) >> Transfer Gear Assembly >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transfer Gear Assembly: Installation

WARNING: This page is about a different car, the 2002 Isuzu Rodeo Sport. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the transfer gear assembly to the universal joint (steering shaft side) align the setting marks made at removal.

    Then tighten the universal joint bolt.

  2. Install the universal joint assembly to the power steering unit assembly align the setting marks made at removal.

    Then temporary tighten the universal joint bolt (both of transfer gear assembly side and power steering unit assembly side).

  3. Install the transfer gear assembly with the shim to frame.

    Torque:  54 N.m (40 lb ft)

  4. Tighten the universal joint bolts to the specified torque.

    Torque:  31 N.m (23 lb ft)

scientia non olet · About LEMON Manuals