Accelerator Pedal

Accelerator Pedal

Accelerator And Associated Parts:

REMOVAL PROCEDURE
1. Disconnect battery ground cable.
2. Disconnect accelerator position (AP) sensor (1) connector from accelerator pedal assembly.
3. Disconnect kick down switch (3) connector from accelerator pedal assembly.
4. Remove accelerator pedal assembly.




INSTALLATION PROCEDURE
1. Install accelerator pedal assembly (2).
2. Connect AP sensor (1) harness and kick down switch (3) harness connector.
3. Connect battery ground cable.


Tighten the screws to 22 N.m (16 lb ft.).