Compressor Assembly And Associated Parts (6VE1): Installation
WARNING: This page is about a different car, the 2002 Isuzu Axiom. However, it is still accessible from the selected car via links, so may be relevant.
- Install compressor.
- Tighten the compressor fixing bolts to the specified torque.
Torque: 19 N.m (14 lb.ft)
- Tighten the compressor fixing bolts to the specified torque.
- Connect refrigerant line connector.
- Tighten the refrigerant line connector fixing bolts to the specified torque.
Torque: 15 N.m (11 lb ft)
- O-rings cannot be reused. Always replace with new ones.
- Be sure to apply new compressor oil to the O-rings when connecting refrigerant lines.
- Tighten the refrigerant line connector fixing bolts to the specified torque.
- Install serpentine belt.
- Move serpentine belt tensioner to loose side using wrench, then install serpentine belt to normal position.
- Connect magnetic clutch harness connector.