Entering A Code

If the Tech-2 display requests that the

• Security Code
• Mechanical Key Number
• Vehicle Identification No.

be entered, process as follows;

To input a digit you need to use the up and down buttons of the Tech-2. By using the numeric buttons the according digit will be displayed at the current position and the cursor will move to the next position.

For letters you need to use the up and down buttons of the Tech-2.

The up and down key might be used for digits as well. By using the up and down buttons the displayed digit or letter will be increased or decreased.

To move to the next position you need to use the move-to-right-button.

With the two buttons, move-to-right and move-to-left you can select the position of number you want to change.

This will allow you to correct a wrong number.

After the number is completed you need to press the Enter button to accept the number. Correction is now no longer possible.

Use the OKAY soft key to program the number and the NOT OKAY soft key to abort the programming.