Tech-2 Features
- Tech-2 is a 12 volt system. Do not apply 24 volts.
- After connecting and/or installing the vehicle communication interface (VCI) module, PCMCIA card and data link connector (DLC) to the Tech-2, connect the tool to the vehicle DLC.
- Make sure the Tech-2 is OFF when removing or installing the PCMCIA card.
- The Tech-2 has the capability of two snapshot.
- The PCMCIA card is sensitive to magnetism and static electricity, so care should be taken in the handling of the card.
- The Tech-2 can not plot a graph when replaying a snapshot.
- Always return to the Main Menu by pressing the EXIT key several times before shutting down.
- To clear diagnostic trouble codes (DTCs), open Application Menu and press "Clear DTC".