LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 2003 >> Axiom XS, RWD >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Component Removal & Installation >> Computerized Engine Control >> Throttle Actuator Control Module (Ascender 5.3L) >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Throttle Actuator Control Module (Ascender 5.3L): Installation

  1. If necessary, install the TAC module bracket (1) and nuts (2). Tighten the nuts to specification. See TORQUE SPECIFICATIONS  . See Fig 3 .
  2. Install TAC module (3) to retaining bracket (1).
  3. Snap TAC module (3) into retaining tab.
  4. Connect engine electrical connector. See Fig 2 .
  5. Connect I/P electrical connector. See Fig 1 .
  6. Install bulk connector to bracket.
Fig 1: Locating Instrument Panel Electrical Connector (Ascender 5.3L)
G00256477Courtesy of GENERAL MOTORS CORP.
Fig 2: Connecting & Disconnecting Electrical Connector At Throttle Actuator Control Module (Ascender 5.3L)
G00256478Courtesy of GENERAL MOTORS CORP.
Fig 3: Removing & Installing Throttle Actuator Control Module (Ascender 5.3L)
G00256479Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals