Reset Engine Control Module (Reset ECM)

Select "Body" and "Immobilizer".
Select "Additional Function" and "Reset Engine Control Module".
The following screen shows up.

Fig 1: Identifying Screen Display Of Tech 2 - Resetting Engine Control Module (1 Of 3)
Courtesy of ISUZU MOTOR CO.
Confirm the following screen shows up.
Input the security code, then press the soft key of "Not Okay" or "Okay".
The following screen shows up.

Fig 2: Identifying Screen Display Of Tech 2 - Resetting Engine Control Module (2 Of 3)
Courtesy of ISUZU MOTOR CO.
Programming is completed.

Fig 3: Identifying Screen Display Of Tech 2 - Resetting Engine Control Module (3 Of 3)
Courtesy of ISUZU MOTOR CO.
When the procedure is completed waits 10 seconds and then turn the Key on.
The fail lamp begins to flash.
Turn the ignition on, then engine dose not run.
Reset is completed.