LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 2006 >> Ascender Limited, RWD >> Repair and Diagnosis >> Brakes >> Antilock Brake System With Traction Control System & Stability Control System >> Repair Instructions >> Traction Control Switch Replacement (Buick) >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Removing/Installing Traction Control Switch (Oldsmobile, Buick)
    GM1265375Courtesy of GENERAL MOTORS CORP.
  1. Install the switch (1) to the trim plate.
    2. Fig 2: Removing/Installing Traction Control Switch Retaining Ring (Oldsmobile, Buick)
    GM1265370Courtesy of GENERAL MOTORS CORP.
  2. Install the retaining ring to the switch, ensuring the ring tabs are fully seated.
    3. Fig 3: Traction Control Switch Electrical Connector (Oldsmobile, Buick)
    GM1265379Courtesy of GENERAL MOTORS CORP.
  3. Connect the electrical connector (1) to the switch.
  4. Install the shift lever bezel. Refer to Console Shift Lever Bezel Replacement (Buick) in Instrument Panel, Gages, and Console.
scientia non olet · About LEMON Manuals