Body Control Module (BCM) Replacement

If the body control module (BCM) is replaced, the following procedures must be performed in the following order:

1. BCM Reprogramming - Refer to Body Control Module (BCM) Programming/RPO Configuration in Computer/Integrating Systems.
2. Learning the restraints ID - Refer to Body Control Module (BCM) Programming/RPO Configuration in Computer/Integrating Systems.
3. Theft Learn - Refer to Programming Theft Deterrent System Components in Theft Deterrent. A new BCM will learn the Passlock(tm) information automatically but the PCM must still learn the theft information from the BCM.
4. Program Key Fobs - Refer to Transmitter Programming in Keyless Entry.