LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 2006 >> i-350 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 3.5L (L52) - Introduction (2 Of 2) >> Repair Instructions >> Fuel Level Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of Fuel Level Sensor
    GM1361720Courtesy of GENERAL MOTORS CORP.
  1. Complete the following in order to install the fuel level sensor to the module assembly:
    1. Align the edges of the sensor with the slots in the module.
    2. Slide the sensor into position, ensure the locking tab is fully engaged.
    2. Fig 2: View Of Fuel Level Sensor Electrical Connector
    GM1361719Courtesy of GENERAL MOTORS CORP.
  2. Connect the fuel level sensor electrical connector to the module.
  3. Install the fuel tank module. Refer to Fuel Tank Module Replacement .
scientia non olet · About LEMON Manuals