PCM Reprogramming
WARNING: This page is about a different car, the 2007 Isuzu i-370, 2007 Isuzu i-290, 2007 GMC Canyon, and 2007 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Ensure that the CKP variation learn procedure is performed after reprogramming.
- If the powertrain control module (PCM) requires programming, the following procedures must be performed:
- The PCM reprogramming-Refer to Service Programming System (SPS) .
- The CKP variation learn-Refer to Crankshaft Position System Variation Learn .
- Engine Oil Life Remaining-When available, use a scan tool to reset the Engine Oil Life Remaining back to the original percentage recorded before the module was reprogrammed.
- Transmission Fluid Life Remaining-When available, use a scan tool to reset the Transmission Fluid Life Remaining back to the original percentage recorded before the module was reprogrammed.