Setup for Component Replacement
WARNING: This page is about a different car, the 2007 Isuzu i-370, 2007 Isuzu i-290, 2007 GMC Canyon, and 2007 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
The replacement of some components will require a setup procedure for complete repair.
If any of the following components are replaced, a crankshaft position (CKP) variation learn procedure must be performed. Refer to Crankshaft Position System Variation Learn .
- Engine replacement
- Any engine repair that disturbs the crankshaft position CKP sensor or its relationship with the crankshaft reluctor wheel
- CKP sensor