Brake Pressure Modulator Valve Bracket Replacement
WARNING: This page is about a different car, the 2007 Pontiac Torrent and 2007 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
Brake Pressure Modulator Valve Bracket Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Place the ignition switch in the OFF position. |
|
| 1 | Brake Modulator Assembly Bracket Bolt
NOTE:
Refer to Fastener Notice
.
Tighten: 20 N.m (15 lb ft) |
| 2 | Brake Modulator Assembly Bracket Nut (Qty: 2) Tighten: 10 N.m (89 lb in) |
| 3 | Brake Modulator Assembly Bracket Tip: Without disconnecting the brake pipe fittings, carefully remove and support the brake modulator assembly. |