LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 2007 >> Ascender 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 458 (Data Communication System) >> Repair Instructions >> Liftgate Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2009 GMC Envoy and 2009 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Liftgate Module Electrical Connectors
    GM749979Courtesy of GENERAL MOTORS CORP.
  1. Install the module to the liftgate.
  2. CAUTION: Refer to Fastener Caution .
  3. Install the bolts that retain the module to the liftgate and tighten to 10 N.m (89 lb in).
  4. Connect the electrical connectors (3) as necessary.
  5. Install the liftgate trim panel. Refer to Liftgate Trim Panel Replacement .
  6. Program the liftgate control module. Refer to Control Module References .