Program All Key Fobs
WARNING: This page is about a different car, the 2008 Saab 9-7X. However, it is still accessible from the selected car via links, so may be relevant.
To complete this programming operation, all keyless entry transmitters associated with the vehicle must be available for programming. Once placed into program mode, all previously programmed transmitters will be erased from memory upon the receipt of the programming signal from the first transmitter.
- Close the lift gate.
- Ignition ON, access the scan tool Liftgate Module Setup menu and select Program All Key Fobs.
- Follow the the scan tool on screen instructions in order to program the transmitters. Select "Start" on the scan tool to enter the program mode.
- As each transmitter is successfully programmed, the scan tool will show how many transmitters have been placed into memory.
- When all transmitters are programmed, exit the program mode by selecting "Stop" on the scan tool. The vehicle will not respond to the transmitters until the program mode is exited.
- Operate the transmitter functions in order to verify correct system operation.