Program Individual Key Fob
WARNING: This page is about a different car, the 2008 Saab 9-7X. However, it is still accessible from the selected car via links, so may be relevant.
If there are less than four keyless entry transmitters programmed to the vehicle, an individual fob transmitter can be added. This method will not erase previously programmed transmitters from memory.
- Close the lift gate.
- Ignition ON, access the scan tool Liftgate Module Setup menu and select Program Individual Key Fob.
- Select "Program additional Key Fob" on the scan tool.
- Follow the the scan tool on screen instructions in order to program the transmitter.
- Operate the transmitter functions in order to verify correct system operation.