LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 2008 >> Ascender LS, RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 4.2L - DTC P0013 To DTC P0365 >> DTC P0351-P0356 >> Circuit/System Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Testing

  1. Turn OFF the ignition.
  2. Disconnect the ECM.
  3. Test the affected IC circuit terminal B for an open, a high resistance, a short to ground and for a short to voltage.
    • If a fault is found, repair the circuit as needed.
  4. Connect the ECM.
  5. Exchange the affected ignition coil/module with the ignition/coil module of a good cylinder.
  6. Start the engine and observe the scan tool.
    • If the DTC or the misfire transfers with the suspect ignition/coil module, replace as needed.
    • If the DTC or the misfire does not transfer with the suspect ignition/coil module, replace the ECM.
scientia non olet · About LEMON Manuals