Installation Procedure

Fig 1: View Of Generator Wiring Components

Courtesy of GENERAL MOTORS CORP.

Insert the generator positive cable (3) into the battery cables harness conduit.

NOTE: Refer to Fastener Notice .

Connect the generator lead (5) to the generator and install the generator output BAT terminal nut (6).
Tighten: Tighten the nut to 20 N.m (15 lb ft).
Press the protective boot (4) on to the generator output BAT terminal (2).

Fig 2: Locating Positive Cable

Courtesy of GENERAL MOTORS CORP.

Install the nut (2) securing the generator positive cable (5) to the underhood fuse block (1).
Tighten: Tighten the nut to 10 N.m (89 lb in).
Install the underhood fuse block cover to the underhood fuse block, engaging the locking tabs.

Fig 3: View Of Battery Cable Harness Retainer

Courtesy of GENERAL MOTORS CORP.

Close the battery cables harness retainer (3).
Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .